#Komplete audio 6 phantom power software

Today I when checked the pins for the mic input with my VM with Pin-1 being ground, these are the readings I got with the switch on then off.ДЇirst of all there shouldn't be any voltage if the switch is off right? The mic I was using is an old Audio Technica ATM31R condenser. Also the input levels were very close to being the same, no significant difference. Okay, I got a chance to check this out with my volt meter.ДЄs I mentioned above, I tested this with the switch both on and off and I got the same results regardless. Pin 1 is ground, and hence the differential audio signal signal (AC) is between pins 2 and 3, and the phantom power (D) is supposed to be seen between pins 2 or 3 versus pin 1. Is this the normal way it works? No big deal, I'm just curious. With all the good folks here that use Audio 6 for an interface I thought someone may have some ideas.ДЄlso While I'm at it, I've noticed that when I change sample rate or buffer settings in Reaper, it's not reflected in Audio 6.

So it appears the 48v Phantom supply is on all the time, regardless of the switch or the 48v indicator on top. Just so you know, I've got enough experience recording microphones, so I'm not mistakenly using a dynamic. The only thing I haven't done is reboot the computer because I'm in the middle of a rather heavy project. I spent about two hours recording some dialog and it turned out good, just as expected. NI Product Owner Messages: 579 Hi all, I finally got a chance to record with my new Komplete Audio 6 today using a condenser microphone. I made some subsequent checks/tests and sure enough, the condenser recorded fine regardless whether the switch was on or off. Komplete Audio 6 (48v Phantom Power) Discussion in ' NI Audio Interfaces ' started by T.S. Then I got to looking and saw that the 48v switch was off. Since everything was being recorded as it should I never checked. The strange thing is, the 48 volt power supply was off.

#Komplete audio 6 phantom power software

With 6 ins/6-outs, it provides a flexible set of connections for studio and stage, with the. Audient EVO 4 Professional 2in/2out USB Audio Interface for Recording, Live Streaming, Gaming & Podcasting with 48V Phantom Power, Dual XLR, Line & DI Input Plus SmartGain Feature & Free Software Bundle.

ItвЂ™s an affordable interface that allows control over your modular system, with intuitive controls, great audio and a simple, modern aesthetic. I spent about two hours recording some dialog and it turned out good, just as expected. The Komplete Audio 6 MKII Audio Interface is the successor to the Komplete Audio 6, first released in 2011. I finally got a chance to record with my new Komplete Audio 6 today using a condenser microphone.